INJECTION DEPOT GROUP
  • Home
    • Product Line Card
    • About Us/ Contact Info >
      • Training 2021
    • COVID-19
  • Used Equipment
    • Injection Moulding Machines >
      • Horizontal >
        • Arburg >
          • Use our Arburg Network
          • 2010 Arburg 570S 2200-400/170
        • Ube >
          • Use our Ube Network >
            • 1999 UBE UM 1000ton
            • 2000 UM720 UBE
            • 2010 UBE UZ 1500 Z-MAX Series
        • Boy >
          • Use our Boy Network
          • ​1991 Boy 50 Ton Machine
          • ​2013 BOY 55E & ​2014 BOY 100E
        • Engel >
          • Use our Engel Network
          • 1997 400 Ton Engel
          • 1997 ENGEL ES750
          • 1998 500-Ton Engel
          • 1999 990 WP Ton Engel Injection Molding Machine
          • 2000 ENGEL ES2750/500AH
          • 2001 ENGEL ES2750/500AH
          • 2004 550 Ton Engel
          • 2005 610 Ton Engel
          • 2006 Engel Speed 200/45 5.6 oz/ps​
          • 2008 Engel EVC 440/240
        • Husky >
          • Use our Husky Network
          • 1999 300 Ton Husky Injection Molding Machine
          • 2006 Husky Q2350 ILC Husky Injection Molding Machine
        • Mitsubishi >
          • Use our Mitsubishi Network
          • 1990 610 ton Mitsubishi
          • 1999 1450 TON MITSUBISHI 220 OZ
        • Nissei >
          • Use our Nissei Network
          • 1998 Nissei FN3000
          • 2006 400 TON NISSEI FN360-100A
        • Sumitomo >
          • Use our Sumitomo Network
          • USED 495 TON, 33.2 OZ SUMITOMO MODEL SE450HD- 1700 ELECTRIC INJECTION MOLDING MACHINE MFG NEW IN 2007
        • Toshiba >
          • 1997 ISG250N-10A Ton Toshiba
          • 1997 ISG500-Ton Toshiba
          • 1998 ISGT 950WV10-81AM Ton Toshiba
          • 2003 1430 TON TOSHIBA ISG1450D-110A
          • 2002 Toshiba ISF1750DV10-110A
          • 2000 TOSHIBA ISGS-610-WV10-59B
          • 2004 ISG950WV10-59B Toshiba
          • 2004 ISG950WV21-59B Toshiba
          • 2005 Toshiba ISGS390W
          • 2015 ISGS500WV50-27AT Toshiba
          • 2016 TIA110SV50-5A Toshiba
          • 2019 EC610SXIIV50-24AT Toshiba
        • WOOJIN >
          • 2014 650 TON WOOJIN DL650S
      • Vertical >
        • Milacron >
          • 2011 130ton Milacron Vertical Rotary
        • Engel >
          • 2001 150 Ton Engel ES330/150VV
          • 2014 50 Ton Engel
      • All Electric >
        • Nissei >
          • Use our Nissei Network >
            • 2005 198 TON NISSEI NEX4000-36E
        • Sumitomo >
          • Use our Sumitomo Network
          • 2007 495 TON Sumitomo Machine SE450HD
          • 2002 Used Sumitomo SE50D
        • TOSHIBA >
          • Use our Toshiba Network
          • 2018 610 TON TOSHIBAT EC610SX-36AT
          • 2017 1950 TON TOSHIBAT EC1950SX-155AT
          • 2016 500 TON TOSHIBAT EC500SX-26AT
          • 2007 TOSHIBA EC45V30-1.5Y
          • 2007 TOSHIBA EC110NIIV30-4A
          • ​2005 TOSHIBA EC240V21-8
          • 2004 ISG950WV21-59B Toshiba
          • 2004 Toshiba EC240V21-8Y
          • 2003 ALL ELECTRIC TOSHIBA EC310V21-8B
          • 2002 TOSHIBA ec500-26B
          • 2002 Toshiba EC65
          • 2003 Toshiba EC45
      • MULTI SHOT >
        • use our MULTI SHOT Network
      • LIM/RUBBER >
        • 2008/6 EC110NIIV30-2A TON TOSHIBA
      • Machines Sold >
        • Sold- 2016 ENGEL VICTORY 3550/560 TECH US
        • Sold 2011 ENGEL E-VICTORY 310/130
        • Sold 2006 180 TON 11.5 OZ TOSHIBA EC180NIIV-30-6
        • Sold - 2006 180 TON 11.5 OZ TOSHIBA EC180NIIV-30-6
        • Sold - 2008 500 TON 56.8 OZ TOSHIBA EC500NVIIV30 26B
        • Sold - 2004 500 TON 56.7 OZ TOSHIBA EC500V21 26B
        • Sold - 2001 400 Ton Engel Injection Molding Machine
        • Sold -1999 750 Ton Engel Injection Molding Machine
        • Sold - 2-1997 110 Ton Nissei Injection Molding Machine
        • Sold - 2004 ENGEL ES 1050/200 TL
        • Sold - 2003 610 TON TOSHIBA ISG610V21-59B
        • Sold - 2012 143 TON TOSHIBA EC140SXV50-U34
        • Sold 2-1999 80 Ton Nissei Injection Molding Machine
        • Sold 2000 200 Ton JSW Injection Molding Machine
        • Sold 2000 500 Ton Husky Injection Moulding Machine
        • Sold 2000 2000 Ton Engel Injection Molding Machine
        • Sold 1998 238 Ton Nissei Injection Molding Machine
        • Sold 2000 154 Ton Nissei Injection Molding Machine
        • Sold 1996 250 Ton Engel Injection Molding Machine
        • Sold 2001 130 TON Battenfeld Injection Molding Machine
        • Sold 2002 110 TON Battenfeld Vertical/Vertical Injection Molding Machine
        • Sold 2001 90 Tons Engel Vertical/Vertical Injection Molding Machine
        • Sold 2002 125 Ton Vertical Engel Injection Molding Machine
        • Sold 1999 110 Ton BattenFeld Vertical / Vertical
        • Sold IMI Online Auction Closed
    • Robots >
      • Engel >
        • Use our Engel Network
        • 2005 Engel Servo Robot
      • Ranger >
        • Use our Ranger Robot Network
        • 2005 Ranger Robot
      • Yushin >
        • Use our Yushin Robot Network
        • Two 2008 ATB-150S Yushin Robots
        • 2010 RA-1300 Yushin Robot
      • Sepro >
        • 2006 Sepro Robot SR4030 S3
        • 2006 SEPRO Axess 10 S3 3-Axis Servo
        • 2011 SEPRO AXESS 33
    • Auxiliary >
      • Core Pull Valve Gate >
        • use our Valve Gate network
        • CPI Automation Ltd.
      • Air Compressor >
        • use our Air Compressor network
        • QUINCY QSF100-125 WITH PURESTREAM DRYER
      • Dryers >
        • Use our Dryers Network
        • Thermal-D Dryer THORESON MCCOSH INC.
        • 2010 Conair Courasel Dryer
        • 2012 Novatec 600 Dryer
        • 2013 NW-3800DC NOVATEC DRYER
        • 2017 Novatec / Dri-Air HP4-X 100 FM Drying System
      • Granulators >
        • use our Granulators network
        • 1997 Rapid Granulator
      • Temperature Control Units >
        • use our Temperature Control Units
        • 2005 Regloplas 150S Oil Temperature Controller
        • 2011 Gammaflux TTC-32795 Temperature Control Unit
        • 2014 Gammaflux G24-37394P
      • Hot Runner Controllers >
        • use our Hot Runner Controllers network
        • 2002 Acetronic MF-5Z
      • Chillers >
        • use our chiller network
        • 2004 AEC 20 Ton Air Cooled Chiller For Sale
        • ​2017 Frigel Microgel Rad 40/12
      • Conveyor & Separator
    • Miscellaneous >
      • (3) USED 5 GALLON 70 MIL SINGLE CAVITY BUCKET MOLD
    • Are You Selling Equipment? >
      • Are You Selling your IMM
      • Are You Selling your Robot?
      • Are You Selling your Dryer?
      • Are you selling your dryer?
    • Looking for Used IMM
  • New Shibaura IMM
    • EC-SX Introduction
    • Customer Support >
      • Shibaura Training 2020
    • V70 Controller
    • Shibaura Machine Technical Center >
      • MoldTrial
    • Downloads >
      • FAQ
      • 15 Things to Know About Servo-Driven Injection Machines
      • Cycle Time Power
    • Shibaura Machine Warranty
    • Electric vs hydraulic
    • All Electric "Medium/Large" >
      • EC500SXII (500 Ton)
      • EC610SXII (610 Ton)
      • EC720SXIII (720 Ton)
      • EC950SXIII (950 Ton) >
        • EC950SXII (950 Ton) Specs
      • EC1100SX (1000 Ton)
      • EC1450SX (1300 Ton)
      • EC1950SX (1800 Ton)
      • EC2750SX (2500 Ton)
    • Servo Hydraulic "Small" >
      • TiA110 (100 Ton)
      • TiA200 (180 Ton)
      • TiA250 (230 Ton)
    • Servo Hydraulic "Medium / Large" >
      • ISGS500 (450 Ton)
      • ISGS610W (550 Ton)
      • ISGT 720W (650 Ton)
      • ISGT950W (850 Ton)
      • ISGT950WII (850 Ton)
      • ISGT1150 (1050 Ton)
      • ISGT1150WII (1050 Ton)
    • Servo Hydraulic "Large" >
      • ISG1450D (1300 Ton)
      • ISG1450D-WP (1300 Ton)
      • ISG1750D (1600 Ton)
      • ISG1750D-WP (1600 Ton)
      • ISG1950D (1800 Ton)
      • ISG2450D (2200 Ton)
      • ISG2750D (2200 Ton)
      • ISG3850D (3500 Ton)
    • Machine Sizing
  • New Sepro Robots
    • Sepro Robot Introduction
    • Customer Support >
      • Sepro Training 2020
    • Sepro Controller
    • 3 Axis Robots >
      • Picker
      • Success
      • Strong
      • S5 Line
      • S5 Speed Line
      • S7 Line
    • 5 Axis Robots >
      • 5X Line
      • 7X Line
      • Success X
    • 6 Axis Robots >
      • Sepro - Stäubli
      • Sepro - Yaskawa
    • Sepro Media
    • Robot Sizing
  • Moretto Aux
    • Moretto Customer Support
    • Feeding and Conveying >
      • Single-Phase Hopper Loaders
      • Venturi Feeders
      • Containers - Receivers
      • Conveying sizing
    • Drying and Hot Air Drying >
      • Mini Dryers
      • X Dryer
      • Eureka (Central System)
      • OTX Hoppers >
        • OTX pictures
      • Sizing
    • Dosing & Blending >
      • Volumetric Dosing Units >
        • Volumetric Sizing
      • Gravimetric Dosing Units >
        • Gravimetric Dosing Sizing
    • Moisture meter
  • Cumberland-Plastics
    • Customer Support
    • Granulator sizing
  • Frigel-Plastics
    • Water Temperature Controllers >
      • Turbogel
      • HB-THERM THERMO-5
    • MACHINE-SIDE TCU/CHILLER COMBINATION >
      • MICROGEL WATER COOLED
      • MICROGEL MICROGEL™ AIR COOLED
  • Moretto downloads
  • Magbo Magnetic Platens
    • Pictures
    • Magbo Sizing
    • Magbo Take The Challenge
  • MoldMasters
  • SRS Low Speed Grinders
    • SRS video
    • 5 Reasons Why You Need A SRS Bi-Cutter Screenless Granulator
    • SRS sizing
  • Intertek
  • Government Grant Initiative Program
  • Energy Saving Grants
  • NPE 2018
  • I.D Internal
  • IDG Members
Picture

Rules and Regulations 2021

Alcona Sunday Nite Ball League     

Team Registration
 
All teams are to be registered with the league before July 23rd 2021 Team fee is $1200 plus any outstanding fees from the previous season. Also a completed roster is required for league insurance purposes. Team rosters can be up to a maximum of 18 players (minimum 3 Ladies) www.slopitch.org
All Players must register with SPO for Insurance purposes.
There will be no refund after 30 days.
Fee and Rosters are required to have your team considered in good standing for the upcoming season. Players and teams not in good standing will forfeit their first league game. With a $40 default charge for each game forfeited.
All rules, information, schedule and standings will be posted on the league website. www.asnb.rocks
 
Fielding a team
1.10 players is required to field a team
2.Teams must have 9 registered players to start a game which consist of a
Minimum of 3 females. In this instance the 10th position is not an automatic out.
3.If unable to do so, it results in a default and $40 is payable to the league immediately following the default.
4.After the start of the game if you cannot field 9 registered plays including 3 females in any inning, the game is a loss and not a default regardless of the inning.
5.At least 3 females must play every inning (any position)
6.If an in injury occurs during the course of a game the automatic out only occurs if that player loss brings you below the required number of players or females. (3rd girl injury=automatic out when she comes up to bat) (11th player injured=no automatic out required unless this beings you below 3 females).
  1. If the injury puts you below the required number of players 9 players the game is a loss.
Picking up Players
You can pick up to a maximum of 3 players from other teams to field a team of 10 players (maximum)This may consist of only one male picked up player, you may pick up 3 female players to field up to the maximum of 10 .
All pickup players must wear their league jersey from their team. And be registered with our league and indicated as a picked up player on the game sheet
Player Requirements
No team shall play a player that is not registered to a league team. The game in which such player is played would be a forfeit and could jeopardize the teams’ continuance in the league. A team may add players to fill their roster up Sunday June 9th 2019. Any changes after this date must be approved by the executive. All games to begin at the scheduled time and players need to be there and ready to play. Umpires can rule a forfeit by any team not ready to start on time. Male players must Play 8 full games and females 6 full games to qualify for play-offs.
Team Requirements
BOTH TEAMS SCHEDULED FOR THE FIRST GAME ON ANY FIELD FOR THE EVENING IS REQUIRED TO HELP SET UP THE BASES AND GET THE FIELD READY FOR PLAY.
BOTH TEAMS PLAYING THE LAST GAME OF THE EVENING ARE REQUIRED TO ENSURE THAT ALL EQUIPMENT IS PUT AWAY AND THE BOXES ARE LOCKED
Each team is responsible for their own scorekeeping and having the score sheet signed by the umpire. Please use the same name on the game sheet that matches the players name on the SBO roster. All teams are required to keep the game sheets for record purposes. The game sheets will be collected occasionally to update games played and will be collected to help with the resolution of any disputed outcomes of a game.
All teams will email the game scores to scores@asnb.rocks  Please have email sent out by Wednesday following the game. Scores not sent in will be considered a loss for the team that has not sent the score.
Defaults
Team deposit of $80 is required to be kept at all times, in the event of a default. A team can default to a maximum of 2 times throughout the season. If a third default occurs the team is unable to play in the playoffs.
The default teams deposit will be used to pay the umpire and remittance of $40 is due immediately to maintain the default funds at $80.
If a default occurs during a playoff game the series becomes a loss to the defaulting team and the deposit is still payable to the league. Emergencies will be the only exception reviewed by the executive.
Teams must meet with the executive upon 3rd default to discuss continuing play with the league.
Rules of Play
  • A game has a maximum of 7(seven) Innings
  • 5 runs per inning except during open inning, which will be the last inning of play
  • Open inning will be called after 1 hour and 10 minutes (if not already in the 7th)
  • The distance between the bases is 65 feet; pitchers mound is 50 feet from home plate
  • Commitment line is 21 feet from home plate
  • No sliding or running over home plate. Runner will be considered out
  • Home plate is a wooden board, which is 24” x 45”
  • Pitching box is 50ft to 60ft 2ft width from home plate. Pitchers must stay within the box.
  • Home plate umpire is supplied and their decision is final
  • Jewellery is allowed and does not have to be covered. Note: It is strongly recommended that no jewelry of any type be worn in SPO play. If worn, each player is solely responsible for any injury/damage that may be cause by this jewelry. Please refrain from using loose jewelry or keep it secured.
  • Any and all disputes will be resolved with the team captains and umpire only.
  • Any intentional body contact or use of foul language by a player is an immediate ejection from that game and the following one. The player must leave the playing area. If the ejected player refuses to leave and causes a delay in the game they will have 3 additional games added to the original suspension.
  • The league reserves the right to investigate and take further action on any and all ejections
  • Teams are to provide face protection for their catchers, but it is an option for the catcher wear the mask provided. They will choose at the start of an inning whether they wish to wear one.
  • Teams are to provide a minimum of 4 helmets for the team, but it is optional for the player to wear one.
  • A maximum of 5 courtesy runners are permitted per game from any position on the field. Courtesy runners are any player of the same gender.
  • Home run rule: 2 UP RULE: Applies to any home run hit over the fence. A team may only be 2 homeruns ahead of the opposing team at any given time, if another home run is hit by the team that is 2 UP; it becomes an automatic out until the opposing team has come within 1 homerun. A ball hit inside the fence area is not considered a home run, for the home run rule.
  • Home Run Retrieval: you hit it; you go get it. Any ball hit for a home run, that player (he/she/team) must retrieve the ball before player who hit the ball can resume play in the infield or outfield. (covid defensive team retrieves the ball)
  • 1st base tag rule: No tagging the runner on their way from batter’s box to first base. PERIOD.
  • 3rd Base tag rule: no tagging the runner between commitment line and home plate
  • Any player ejected from a game is suspended for remainder of that game and the next scheduled game for that team. Team is not penalized with an automatic out unless this brings them below 10 players in the batting order.
  • Initial throw to get an out at home must first be played only by the back catcher at the plate, then if missed, any player may play the ball and touch home plate.
  • There is no ladies line in the outfield.
  • The first play from the outfield cannot be to first base. Play can made to cut off person then to first. Unless it is a catch and the base runner did not tag first. It is considered the second play and a throw is allowed to first.
  • Please ensure that any suspended player is listed at the bottom of the game sheet as serving the suspension for that game.
REMINDER NO TEAM MAY PICK UP A PLAYER DURING PLAYOFFS UNLESS THERE IS AN ABSOLUTE INJURY AND MUST BE APPROVED BY EXECUTIVE.
Only composite bats on the USSA licensed/ Approved bat list are legal for use. To be legal they must be marked with the new “USSSA BPF 1.20” mark. Teams are to provide their own legal bats for use during the game, and provide such bats, as the umpire deems necessary for inspection. Thumb print bats are mandatory. If a team is found to have used an illegal bat the game will be forfeit, not a default and this will be recorded on the score sheet. A second forfeit will be considered a default. If a team is found using an illegal bat(s) 2 or more times the forfeit will be considered a default and the team will be unable to participate in playoffs. Teams continuing to choose the use of illegal bats will result in an executive review and their team’s participation in the league may be jeopardized.
Rain
 In the event of rain 4 complete innings will be considered a game. If all games are on a given night are cancelled due to weather a point will be awarded to each team scheduled to play. If only some games in the evening are cancelled due to rain the non-played games will be rescheduled for a later date, an executive meeting will be held to schedule these games.
Code of Conduct
  • There is zero tolerance for any abuse verbal, physical or otherwise of any official or other players.
  • You may be asked to leave the diamond and incur a suspension to be determined by the executive.
  • Substance abuse is not tolerated and you will be asked to leave the diamond


Chris Butcher
705-627-5456
ChrisButcher@injectiondepot.ca
Injection Depot Group,  all Rights reserved 2017

  • Home
    • Product Line Card
    • About Us/ Contact Info >
      • Training 2021
    • COVID-19
  • Used Equipment
    • Injection Moulding Machines >
      • Horizontal >
        • Arburg >
          • Use our Arburg Network
          • 2010 Arburg 570S 2200-400/170
        • Ube >
          • Use our Ube Network >
            • 1999 UBE UM 1000ton
            • 2000 UM720 UBE
            • 2010 UBE UZ 1500 Z-MAX Series
        • Boy >
          • Use our Boy Network
          • ​1991 Boy 50 Ton Machine
          • ​2013 BOY 55E & ​2014 BOY 100E
        • Engel >
          • Use our Engel Network
          • 1997 400 Ton Engel
          • 1997 ENGEL ES750
          • 1998 500-Ton Engel
          • 1999 990 WP Ton Engel Injection Molding Machine
          • 2000 ENGEL ES2750/500AH
          • 2001 ENGEL ES2750/500AH
          • 2004 550 Ton Engel
          • 2005 610 Ton Engel
          • 2006 Engel Speed 200/45 5.6 oz/ps​
          • 2008 Engel EVC 440/240
        • Husky >
          • Use our Husky Network
          • 1999 300 Ton Husky Injection Molding Machine
          • 2006 Husky Q2350 ILC Husky Injection Molding Machine
        • Mitsubishi >
          • Use our Mitsubishi Network
          • 1990 610 ton Mitsubishi
          • 1999 1450 TON MITSUBISHI 220 OZ
        • Nissei >
          • Use our Nissei Network
          • 1998 Nissei FN3000
          • 2006 400 TON NISSEI FN360-100A
        • Sumitomo >
          • Use our Sumitomo Network
          • USED 495 TON, 33.2 OZ SUMITOMO MODEL SE450HD- 1700 ELECTRIC INJECTION MOLDING MACHINE MFG NEW IN 2007
        • Toshiba >
          • 1997 ISG250N-10A Ton Toshiba
          • 1997 ISG500-Ton Toshiba
          • 1998 ISGT 950WV10-81AM Ton Toshiba
          • 2003 1430 TON TOSHIBA ISG1450D-110A
          • 2002 Toshiba ISF1750DV10-110A
          • 2000 TOSHIBA ISGS-610-WV10-59B
          • 2004 ISG950WV10-59B Toshiba
          • 2004 ISG950WV21-59B Toshiba
          • 2005 Toshiba ISGS390W
          • 2015 ISGS500WV50-27AT Toshiba
          • 2016 TIA110SV50-5A Toshiba
          • 2019 EC610SXIIV50-24AT Toshiba
        • WOOJIN >
          • 2014 650 TON WOOJIN DL650S
      • Vertical >
        • Milacron >
          • 2011 130ton Milacron Vertical Rotary
        • Engel >
          • 2001 150 Ton Engel ES330/150VV
          • 2014 50 Ton Engel
      • All Electric >
        • Nissei >
          • Use our Nissei Network >
            • 2005 198 TON NISSEI NEX4000-36E
        • Sumitomo >
          • Use our Sumitomo Network
          • 2007 495 TON Sumitomo Machine SE450HD
          • 2002 Used Sumitomo SE50D
        • TOSHIBA >
          • Use our Toshiba Network
          • 2018 610 TON TOSHIBAT EC610SX-36AT
          • 2017 1950 TON TOSHIBAT EC1950SX-155AT
          • 2016 500 TON TOSHIBAT EC500SX-26AT
          • 2007 TOSHIBA EC45V30-1.5Y
          • 2007 TOSHIBA EC110NIIV30-4A
          • ​2005 TOSHIBA EC240V21-8
          • 2004 ISG950WV21-59B Toshiba
          • 2004 Toshiba EC240V21-8Y
          • 2003 ALL ELECTRIC TOSHIBA EC310V21-8B
          • 2002 TOSHIBA ec500-26B
          • 2002 Toshiba EC65
          • 2003 Toshiba EC45
      • MULTI SHOT >
        • use our MULTI SHOT Network
      • LIM/RUBBER >
        • 2008/6 EC110NIIV30-2A TON TOSHIBA
      • Machines Sold >
        • Sold- 2016 ENGEL VICTORY 3550/560 TECH US
        • Sold 2011 ENGEL E-VICTORY 310/130
        • Sold 2006 180 TON 11.5 OZ TOSHIBA EC180NIIV-30-6
        • Sold - 2006 180 TON 11.5 OZ TOSHIBA EC180NIIV-30-6
        • Sold - 2008 500 TON 56.8 OZ TOSHIBA EC500NVIIV30 26B
        • Sold - 2004 500 TON 56.7 OZ TOSHIBA EC500V21 26B
        • Sold - 2001 400 Ton Engel Injection Molding Machine
        • Sold -1999 750 Ton Engel Injection Molding Machine
        • Sold - 2-1997 110 Ton Nissei Injection Molding Machine
        • Sold - 2004 ENGEL ES 1050/200 TL
        • Sold - 2003 610 TON TOSHIBA ISG610V21-59B
        • Sold - 2012 143 TON TOSHIBA EC140SXV50-U34
        • Sold 2-1999 80 Ton Nissei Injection Molding Machine
        • Sold 2000 200 Ton JSW Injection Molding Machine
        • Sold 2000 500 Ton Husky Injection Moulding Machine
        • Sold 2000 2000 Ton Engel Injection Molding Machine
        • Sold 1998 238 Ton Nissei Injection Molding Machine
        • Sold 2000 154 Ton Nissei Injection Molding Machine
        • Sold 1996 250 Ton Engel Injection Molding Machine
        • Sold 2001 130 TON Battenfeld Injection Molding Machine
        • Sold 2002 110 TON Battenfeld Vertical/Vertical Injection Molding Machine
        • Sold 2001 90 Tons Engel Vertical/Vertical Injection Molding Machine
        • Sold 2002 125 Ton Vertical Engel Injection Molding Machine
        • Sold 1999 110 Ton BattenFeld Vertical / Vertical
        • Sold IMI Online Auction Closed
    • Robots >
      • Engel >
        • Use our Engel Network
        • 2005 Engel Servo Robot
      • Ranger >
        • Use our Ranger Robot Network
        • 2005 Ranger Robot
      • Yushin >
        • Use our Yushin Robot Network
        • Two 2008 ATB-150S Yushin Robots
        • 2010 RA-1300 Yushin Robot
      • Sepro >
        • 2006 Sepro Robot SR4030 S3
        • 2006 SEPRO Axess 10 S3 3-Axis Servo
        • 2011 SEPRO AXESS 33
    • Auxiliary >
      • Core Pull Valve Gate >
        • use our Valve Gate network
        • CPI Automation Ltd.
      • Air Compressor >
        • use our Air Compressor network
        • QUINCY QSF100-125 WITH PURESTREAM DRYER
      • Dryers >
        • Use our Dryers Network
        • Thermal-D Dryer THORESON MCCOSH INC.
        • 2010 Conair Courasel Dryer
        • 2012 Novatec 600 Dryer
        • 2013 NW-3800DC NOVATEC DRYER
        • 2017 Novatec / Dri-Air HP4-X 100 FM Drying System
      • Granulators >
        • use our Granulators network
        • 1997 Rapid Granulator
      • Temperature Control Units >
        • use our Temperature Control Units
        • 2005 Regloplas 150S Oil Temperature Controller
        • 2011 Gammaflux TTC-32795 Temperature Control Unit
        • 2014 Gammaflux G24-37394P
      • Hot Runner Controllers >
        • use our Hot Runner Controllers network
        • 2002 Acetronic MF-5Z
      • Chillers >
        • use our chiller network
        • 2004 AEC 20 Ton Air Cooled Chiller For Sale
        • ​2017 Frigel Microgel Rad 40/12
      • Conveyor & Separator
    • Miscellaneous >
      • (3) USED 5 GALLON 70 MIL SINGLE CAVITY BUCKET MOLD
    • Are You Selling Equipment? >
      • Are You Selling your IMM
      • Are You Selling your Robot?
      • Are You Selling your Dryer?
      • Are you selling your dryer?
    • Looking for Used IMM
  • New Shibaura IMM
    • EC-SX Introduction
    • Customer Support >
      • Shibaura Training 2020
    • V70 Controller
    • Shibaura Machine Technical Center >
      • MoldTrial
    • Downloads >
      • FAQ
      • 15 Things to Know About Servo-Driven Injection Machines
      • Cycle Time Power
    • Shibaura Machine Warranty
    • Electric vs hydraulic
    • All Electric "Medium/Large" >
      • EC500SXII (500 Ton)
      • EC610SXII (610 Ton)
      • EC720SXIII (720 Ton)
      • EC950SXIII (950 Ton) >
        • EC950SXII (950 Ton) Specs
      • EC1100SX (1000 Ton)
      • EC1450SX (1300 Ton)
      • EC1950SX (1800 Ton)
      • EC2750SX (2500 Ton)
    • Servo Hydraulic "Small" >
      • TiA110 (100 Ton)
      • TiA200 (180 Ton)
      • TiA250 (230 Ton)
    • Servo Hydraulic "Medium / Large" >
      • ISGS500 (450 Ton)
      • ISGS610W (550 Ton)
      • ISGT 720W (650 Ton)
      • ISGT950W (850 Ton)
      • ISGT950WII (850 Ton)
      • ISGT1150 (1050 Ton)
      • ISGT1150WII (1050 Ton)
    • Servo Hydraulic "Large" >
      • ISG1450D (1300 Ton)
      • ISG1450D-WP (1300 Ton)
      • ISG1750D (1600 Ton)
      • ISG1750D-WP (1600 Ton)
      • ISG1950D (1800 Ton)
      • ISG2450D (2200 Ton)
      • ISG2750D (2200 Ton)
      • ISG3850D (3500 Ton)
    • Machine Sizing
  • New Sepro Robots
    • Sepro Robot Introduction
    • Customer Support >
      • Sepro Training 2020
    • Sepro Controller
    • 3 Axis Robots >
      • Picker
      • Success
      • Strong
      • S5 Line
      • S5 Speed Line
      • S7 Line
    • 5 Axis Robots >
      • 5X Line
      • 7X Line
      • Success X
    • 6 Axis Robots >
      • Sepro - Stäubli
      • Sepro - Yaskawa
    • Sepro Media
    • Robot Sizing
  • Moretto Aux
    • Moretto Customer Support
    • Feeding and Conveying >
      • Single-Phase Hopper Loaders
      • Venturi Feeders
      • Containers - Receivers
      • Conveying sizing
    • Drying and Hot Air Drying >
      • Mini Dryers
      • X Dryer
      • Eureka (Central System)
      • OTX Hoppers >
        • OTX pictures
      • Sizing
    • Dosing & Blending >
      • Volumetric Dosing Units >
        • Volumetric Sizing
      • Gravimetric Dosing Units >
        • Gravimetric Dosing Sizing
    • Moisture meter
  • Cumberland-Plastics
    • Customer Support
    • Granulator sizing
  • Frigel-Plastics
    • Water Temperature Controllers >
      • Turbogel
      • HB-THERM THERMO-5
    • MACHINE-SIDE TCU/CHILLER COMBINATION >
      • MICROGEL WATER COOLED
      • MICROGEL MICROGEL™ AIR COOLED
  • Moretto downloads
  • Magbo Magnetic Platens
    • Pictures
    • Magbo Sizing
    • Magbo Take The Challenge
  • MoldMasters
  • SRS Low Speed Grinders
    • SRS video
    • 5 Reasons Why You Need A SRS Bi-Cutter Screenless Granulator
    • SRS sizing
  • Intertek
  • Government Grant Initiative Program
  • Energy Saving Grants
  • NPE 2018
  • I.D Internal
  • IDG Members